What 71 owners told NHTSA about the 2021 Jeep Grand Cherokee L

While my wife was driving our 2021 Jeep Grand Cherokee on [XXX] northbound in NY on the way with our children to school, she experienced a loss of steering as the wheel became almost impossible to turn. At the same time, the power steering light came on. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ODI 11746605

THE PASSENGER DOOR DOES NOT ALERT WHEN OPENING OR CLOSE . THE TBM MODULE DOES NOT UPDATE CAUSING A FEE OF $198.95

NHTSA ODI 11739246

My AC compressor and condenser have stopped working without any reason. The air conditioner does not work at all, it does not make the air cold and the heat in [XXX] is lethal. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ODI 11737943

In May 2025 the vehicle randomly, and without warning, the instruments, gauges, and displays switched to Italian, changed to Metric, and we got the update and FCW Off light stuck on. Numerous other settings had been reset. Took to dealer and had to pay for the fix - they noted a STAR bulletin on my invoice. Then this past weekend (May 2, 2026) it happened again. At least this time it didn't go Italian and Metric on me, but lots of other settings were changed. Did not test the paddle shifters but will do that soon. Current software version says FCA-MY24.U29.42-PROD. I've seen other posts with a newer version - not sure if / why not on my Jeep yet.

NHTSA ODI 11735441

Vehicle: 2021 Jeep Grand Cherokee L Issue Type: Electrical System / Loss of Power / Braking System While operating my 2021 Jeep Grand Cherokee L on Interstate 40 at approximately 70 miles per hour, with two minor children in the vehicle, the vehicle suddenly and without any prior warning began to rapidly decelerate, despite continued pressure on the accelerator pedal. At the time the deceleration began, there were no warning lights, alerts, or indications of any malfunction. The vehicle exhibited a significant loss of power, and it felt as though it was being mechanically restricted or “dragging,” severely limiting its ability to maintain highway speed. Only after the vehicle had already begun to decelerate did a brake system warning indicator appear on the dashboard. This sequence of events indicates that the warning system did not provide advance notice of the failure. This sudden and uncommanded deceleration created an immediate and serious safety hazard, particularly given the vehicle’s speed and surrounding interstate traffic. The inability of the vehicle to respond appropriately to acceleration input placed occupants at risk of a rear-end collision or other serious traffic incident. Although the warning indicator later turned off, the vehicle continued to operate abnormally, with ongoing reduced acceleration and diminished responsiveness. This incident occurred without prior warning, and the delayed activation of the brake warning indicator raises serious concerns regarding a potential defect involving the vehicle’s electrical, braking, and/or powertrain control systems, including possible failure of system monitoring or alert mechanisms. Given the circumstances including highway speed, sudden loss of propulsion, delayed warning notification, and the presence of child passengers. I respectfully request that this issue be formally investigated as a safety-related defect.

NHTSA ODI 11728679

At 78,800 my truck started experiencing "stuttering" trying to pick up speed like the transmission wouldn't shift into gear and the Uconnect stopped working simultaneously. Also seems to be burning through more oil. It happens every single time you take off from a stop until the vehicle finally shifts into gear, it's very scary and very dangerous when you're trying to merge onto a beltway and you can't pick up speed correctly.

NHTSA ODI 11727878

I am reporting a failure of the Steering Column Control Module (SCCM) in my 2021 Jeep Grand Cherokee L Overland. The failure is manifesting as an error message saying "service transmission" and the code that it is throwing says that the paddle shifters are overheating. This component is identical to the modules currently under Safety Recall 36B (NHTSA 24V-199) and Equipment Recall 15B (NHTSA 24E-025). The manufacturer has admitted that these modules possess an internal weld defect that prevents the driver’s side airbag from deploying in the event of a crash. Despite the clear safety risk and the fact that this model year/body style (WL) is the primary population for this defect, the manufacturer (Stellantis/Jeep) refuses to cover the repair, stating my specific VIN is not "flagged" in their internal database. I am concerned that the scope of the existing recalls is too narrow and that my vehicle is currently being operated with a non-functional or unreliable driver's airbag system due to this known hardware defect. I am requesting an investigation into why 2021 Grand Cherokee L models with these exact symptoms are being excluded from the safety remedy.

NHTSA ODI 11723299

I experienced electrical issues that resulted in loss of steering and difficulty turning my 2021 Jeep Cherokee Laredo. The steering became very hard to turn, and warning lights were present. This created a safety concern because the vehicle was difficult to control. I took the vehicle to an authorized Jeep dealership in Midwest City, Oklahoma. The dealership diagnosed the issue as a fuse array and attempted a repair. The vehicle remained at the dealership for approximately five days. After the repair attempt, I was informed that the fuse blew and that the vehicle now requires replacement of the power steering assembly. I was unable to afford the additional repair. The vehicle was returned to me with the original steering problem unresolved and remains difficult or unsafe to operate. I am reporting this because the vehicle experienced loss of steering, a serious safety issue, and was returned unrepaired after a failed diagnosis and repair attempt. I am concerned about a potential safety defect involving the steering and electrical system.

NHTSA ODI 11711195

Started driving home and heard the vehicle making clinking noises. Then the service 4wd light came on. It slips in shifting almost like the vehicle shuts down for a sec and then comes back. When you are sitting the vehicle will randomly jerk forward even in park mode. Like the brake releases and then comes back. It's very unsafe and with it shifting the way it does the actuator is failing which in return will cause a very bad accident. This car can just shut down at any given moment.

NHTSA ODI 11700225

Randomly, and without warning, the instruments, gauges, and displays will switch to Italian along with cluster and radio display settings reverting to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. change to metric and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. The dealer charge me $300 diagnostic fee before resetting the software. Time goes by and it happens again. Dealer says there is nothing they can do and to wait for a software update from Stellantis, but none has come and it has been over a year. When this happens, I can change "some" of the settings back but some items cannot be reset like the FCA off lamp and paddle shifters. Back to the dealer I go for another $300 charge. Here is an example Jeep forum discussion, indicating many if not all vehicles are affected: https://www.jeepgarage.org/threads/forward-collision-warning-off-light-is-stuck-on.250301/#replies From personal experience, all of these issues started several years ago with an over the air software. This is a well known and widespread problem, and there is even a DOT Bulletin on the issue: dot.report Bulletins Because this is dangerous (for settings/gauges/units to no longer be useful while driving), and it occurs randomly, I strongly believe this issue should be a manufacturer recall. I am available for any needs."

NHTSA ODI 11694717

There is a module that needs some sort of update I have power but my steering completely went out. All the lights in my dash came on, and my odometer started blinking. Ive read that newer models the 2023 edition also has this problem and has an open recall right now.

NHTSA ODI 11691462

One day, I tried to start my vehicle using the push start button, and it fell off into a hole. There were no indications or warning signs that the button was loose or needed to be replaced. When I took my vehicle to the dealership where I originally purchased it for routine maintenance, they never mentioned that the button had worn out. If it were an emergency situation where I had to turn the vehicle off and the button had randomly fallen off, there would be no other way to turn the vehicle off or on.

NHTSA ODI 11685523

Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. I have taken it to the dealer twice, and they say there is nothing they can do and to wait for a possible software update, but none has come and it has been over a year. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] Many people on the forum believe this issue did not start until a software update a year or so ago. This is a well known and widespread problem, and there is even a DOT Bulletin on the issue: dot.report Bulletins Because this is dangerous (for settings/gauges/units to no longer be useful while driving), and it occurs randomly, I strongly believe this issue should be a manufacturer recall. I am available for any needs. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ODI 11678995

I just discovered my IPC module is faulty and has been faulty. My vehicle has been putting itself into park while driving multiple times now in the little over 2 years I’ve had it. Along with many other electrical issues (power steering going out) engine not cutting off after putting it I to park and cutting the jeep off. Dash going out. Biggest issue is my vehicle causing me near miss traffic accidents. The dealership it was purchased from, certified. Hid service history reports at the sale. Also returned this vehicle multiple times without acknowledging the issue or even telling me they didn’t repair the issue. Last time it was picked up from Matt Bowers Jeep in Baton Rouge within 30 mins the issue was happening and more (rpms shooting up and Jeep taking off without giving it gas). I went public and another dealership reached out to help me. Within a few hours they noted that the vast majority of my modules weren’t updated, some bad and the IPC module keeps failing. They’re working with Stellantis trying to troubleshoot the issue. This has never been made known by Matt Bowers and matches the original service records hidden from day one. I cant get my vehicle back while the IPC module is faulty because it’s a serious safety hazard. Matt Bowers has put me back I to This vehicle multiple times knowing it was a hazard and I even Stated I felt unsafe in this Jeep. This is a serious safety hazard!!! Mopar was also made aware and has never returned any messages.

NHTSA ODI 11670030

Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. I have taken it to the dealer twice, and they say there is nothing they can do and to wait for a possible software update, but none has come and it has been over a year. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] Many people on the forum believe this issue did not start until a software update a year or so ago. This is a well known and widespread problem, and there is even a DOT Bulletin on the issue: dot.report Bulletins Because this is dangerous (for settings/gauges/units to no longer be useful while driving), and it occurs randomly, I strongly believe this issue should be a manufacturer recall. I am available for any needs." INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ODI 11669994

My vehicle was experiencing the exact same HVAC/AC issues described in Customer Satisfaction Notification Z33 for the 2021 Jeep Grand Cherokee L. Although the campaign specifically lists my make, model, and year, Stellantis claims my VIN is not covered. I was forced to pay $175 for the same repair listed in the Z33 document (HVAC module flash, Labor Code 18-Z3-31-82), and this should have been covered. Stellantis is refusing reimbursement even though the issue and fix are identical.

NHTSA ODI 11668070

While driving at 60mph, the vehicle became unresponsive and electronically shifted into park unexpectedly. No warning lights were present, and the dealership's service department could not replicate the issue.

NHTSA ODI 11659289

Upon startup, power steering service needed, no AEB, no lane departure warning available. Power steering does not work.

NHTSA ODI 11652230

The vehicle didn’t automatic update of its “UCONNECT” system without warning after stopping at a gas station. Once the vehicle was turned back on after the update was completed there was a light on my dashboard signaling that the forward collision warning system is off. Some other things happened as well such as all my settings were reverted back to factory settings, and the menu screen was in Italian. After online research, it seems that this is a very common problem with the specific model. I was able to revert everything except for the Ford Collision , warning, which still states that it is OFF, after the update. After communicating all this information with Jeep, they want me to pay for a repair that was due to their system update.

NHTSA ODI 11652305

My dash cluster is completely blank. I am merely reporting this to the NHSTA for purposes of record and it being a very unsafe situation in not being able to see my speed among many other safety issues the cluster provides. This is a HUGE safety concern and caused me a great amount of stress trying to drive to work today. It looks as though Jeep has already provided a recall for a very similar issue with their Jeep Wranglers & Gladiator vehicles. I own a 2021 Jeep Grand Cherokee L - Attitude model.

NHTSA ODI 11649663

The 2021 Jeep Grand Cherokee L has has numerous electrical issues. The screens glitch while driving, auto stop start system does not work, back hatch will not close sporadically. These issues are happening to many Grand Cherokee L owners and the dealership says they are "known issues". Batteries have been replaced and issues persist. The electrical system issues are now causing the car to drive inconsistently.

NHTSA ODI 11641407

Jeep recently pushed an update through the vehicle over the air. Since the update the forward collision disable warning light has been illuminated on the front cluster. All attempts to correct the issue have rendered useless. The update has caused the safety feature of the front collision warning (sound and/or breaking) inoperable.

NHTSA ODI 11640275

The forward collision warning light came on and will not go off. I have had the sensors tested for recalibration and the test showed that the sensors are working. Light is still on. MOPAR is aware of this issue as there are dozens of complaints in online forums and a STAR online publication has been published by MOPAR Case number:S2108000249

NHTSA ODI 11636545

I was due for an inspection sticker and my vehicle did not pass due to it initially during and not having driven enough miles to reset the code. I had drove enough miles and was going to get it reinspected but the battery died again. I had jumped my vehicle and drove it to reset the code again however upon stop at a red light the car turned over and wouldn’t start up again. I had three of my kids in the car and can’t imagine if I was not close to home with them or on a highway when this happened. There were no warnings and the police had to call in tow due the hazardous situation. The dealership said the issue was that the radio was causing battery drainage of both batteries in my car.

NHTSA ODI 11633555

The dash lit up with all lights and it said SOS Power STEERING is out. I could not turn the wheel. The lights such as my miles was blinking, the seat belt was flashing along with dinging even though my seat belt was on. There has been recalls due to power steering issues but my car isn't on there. It put me and my son at risk for a terrible accident. I have taken it to a dealership. There were no warnings prior to this incident.

NHTSA ODI 11631019