What 1,793 owners told NHTSA about the 2018 Jeep Wrangler 4-door 4xe

UNKNOWN what failed because it burned to the ground. August 8, 2025 The Jeep was running and driving normal. I pulled over into Robert Louis Stevenson Park parking area to let my kids (ages 3 and 4) out for a potty break. I left the vehicle running since it was hot and the AC was on. As I was getting my first child out smoke started pouring out of the passenger side wheel well and hood, coming from the engine compartment. I got my kids out in a hurry and there were flames within about 45 seconds. The Jeep was fully engulfed within about 2 minutes. Fire department took 12 minutes to arrive on scene and extinguish the Jeep fire and accompanying tree that had caught on fire. All of my belongings inside the vehicle were destroyed and not covered under the vehicle insurance policy. I am grateful I managed to get my kids out of the car and to safety and that we are all okay, but this was an extremely dangerous situation and we are lucky we pulled over where we did. I reached out to Stellantis, and they sent out an investigator, but he was bound by privacy rules with them, and nobody ever told me what they found other than Stellantis sending a letter saying "they are not led to believe it was a manufacturing responsibility." Additionally, there was a police report filed with Napa, CA California Highway Patrol Office, as another car was melted a bit during the incident. There were ZERO warnings that anything was wrong with the vehicle while driving. Nothing to indicate that something catastrophic was about to happen or that anything was wrong at all. The Jeep only had 27,000 miles on it and had been dealer serviced its entire life and only 1,000 miles prior to this incident as well.

NHTSA ODI 11710924

The contact owns a 2018 Jeep Wrangler. The contact stated that while driving approximately 55 - 65 MPH, the instrument panel suddenly failed to illuminate, then completely went black. While attempting to fix the failure, an image of the type of vehicle was displayed, and the instrument panel illuminated intermittently. Over time, the instrument panel only illuminated with a blue light but failed to display the temperature, mileage, and other necessary safety information. The contact became aware of NHTSA Campaign Number: 24V652000 (Electrical System); however, the VIN was not included. The dealer was contacted and confirmed that the VIN was not included. The vehicle was not diagnosed or repaired. The manufacturer was not informed of the failure. The failure mileage was unknown.

NHTSA ODI 11709591

The front right brake caliper on my 2018 Jeep Wrangler was installed upside down from the factory, with the bleeder screw located at the bottom of the caliper instead of the top. The vehicle has been serviced exclusively at authorized Jeep dealerships since new, with no prior front brake work, confirming this was a factory assembly defect and not the result of repair or modification. Because the bleeder screw is positioned at the bottom, air cannot be fully purged from the hydraulic system, which can result in incomplete bleeding, reduced braking performance, uneven pad wear, brake drag, or brake fade. This condition compromises the ability to properly service the braking system and may negatively affect braking effectiveness, creating a potential safety hazard, especially during emergency braking. The defect was discovered during routine inspection when brake performance and wear were evaluated (12-11-25). Photographs and dealership service records are available documenting the inverted caliper and confirming no prior disassembly.

NHTSA ODI 11709385

What component or system failed or malfunctioned, and is it available for inspection upon request? THE THROTTLE FAILED ON THE FREEWAY DUE TO A BREAK IN THE ENGINE HARNESS. HAVE FULL REPAIR RECEIPTS FROM SHOP. How was your safety or the safety of others put at risk? FULL ENGINE AND THROTTLE FAILURE ON FREEWAY MULTIPLE TIMES, 1X ON A STRETCH OF FREEWAY WITH LITTLE TO NO SHOULDER WITH MY 1 YEAR OLD IN THE BACK SEAT. Has the problem been reproduced or confirmed by a dealer or independent service center? YES, FULL SERVICE REPAIR RECEIPTS ON HAND. Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? YES Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? NO

NHTSA ODI 11709279

The Instrument Panel Cluster in my Jeep is flickering and then goes blank. I had it evaluated at a Jeep dealership and they recommend replacement. I'm uploading their assessment of the problem. This is the same issue noted in NHTSA ID Number: 24V652000. However, my VIN number is not included in the recall. I believe the recall should be expanded to include my vehicle. I'm including a copy of the evaluation and screenshots from a video taken on Oct 29, 2025, one showing the instrument panel lit up, and the second screenshot showing it blank minutes later. The video was taken while I was stopped at a stoplight. You can see another car in front of me through the windshield. I can provide the video as well, but the uploads do not take video uploads. Please help address this safety issue. I believe there are more vehicles like mine with this issue that are not currently included in the recall. Thank you.

NHTSA ODI 11708645

The jeep lost power while I was driving. The lights stayed on but jeep came to a stop. I touched the key area and it started running again.

NHTSA ODI 11708593

Problem Description (very important): My 2018 Jeep Wrangler experiences a severe and violent front-end shaking commonly referred to as “death wobble.” This occurs while driving at highway speeds and makes the vehicle difficult to control until I slow down significantly. The shaking feels dangerous and unpredictable and creates a serious safety risk. I transport my children in this vehicle, and this issue is frightening and unsafe for passengers and other drivers. My dealership states there is no recall, but I am aware of widespread consumer complaints, documented defects, and lawsuits involving death wobble in Jeep Wranglers, including the 2018 model year. I believe this is a known steering/suspension defect and not normal wear and tear. I am reporting this for safety reasons.

NHTSA ODI 11707581

It states that our vehicle is not on the recall list for death wobble, however, when we go over a bump or over 60 mph our Jeep vibrates and shakes (feeling it in the steering). We took to have tires checked, even rebalanced and they checked stems.

NHTSA ODI 11707402

My 2018 Jeep Wrangler Unlimited has experienced repeated no-start failures and electrical/CAN-bus communication issues. The vehicle has intermittently failed to start and ultimately became completely inoperable. Due to the electrical failure, the vehicle was towed to an authorized Jeep dealership on June 8, 2025. Despite remaining in the dealership’s possession for several months, no diagnostic testing or repairs have been completed. The electrical failure prevents safe and reliable operation of the vehicle and poses a risk of being stranded without warning. As of December 2025, the vehicle remains inoperable and unrepaired.

NHTSA ODI 11707274

The vehicle experienced a fuel/propulsion failure involving sudden loss of engine power. After internal engine repairs performed by the dealership (camshaft and valvetrain work), the vehicle was returned to me as repaired and safe to operate. Within minimal post-repair driving (less than one mile), the vehicle entered limp mode, lost propulsion, and the engine shut down while driving in active traffic. The vehicle required towing back to the dealership. The loss of propulsion occurred on a busy city roadway and created an immediate safety risk to me and surrounding motorists due to the sudden inability to maintain speed or power, with a foreseeable risk of collision. The problem has been confirmed by the dealership. After subsequent inspection and teardown, the dealer documented catastrophic internal engine damage, including cylinder wall scoring and a failed head gasket. The dealership acknowledged that deeper inspection during the prior internal engine repair would have revealed the need for engine replacement. The vehicle has been inspected by the dealership multiple times and by the dealership’s insurer. The manufacturer (Stellantis) has opened a customer care case. The vehicle is currently available for inspection and has been removed from service due to safety concerns. Prior to the failure, the vehicle displayed warning indicators and messages at the time of the incident, including limp mode activation and critical alerts immediately before and during the shutdown. No warnings were provided to me at the time the vehicle was returned from repair regarding unresolved internal engine risk or potential loss of propulsion.

NHTSA ODI 11707112

Dash cluster will go blank upon starting. This has happened every few weeks since I bought it in Nov 2019. Reported to local dealership in ealry 2020, but when you turn off Jeep, the next time it restarts, everything looks fine and they could not reproduce the problem at the dealership and had no answers as they had not seen it before, as no codes were being given. I never went back since i was told they had no answers. When it happens, you are driving blind-No digital speedometer, warning lights or gas gauge when it happens. Now the most recent issue, the security system light comes on randomly upon starting. Also have to push start button more than once to get it to actually start, so this could be different issues. A recall for the cluster finally came out last year i think, but my Jeep was not on the recall list even though it DOES have the problem and has had it for years. Would love some help or guidance!

NHTSA ODI 11705512

When shifting into reverse, the rear camera feed would not appear on screen. I tried shifting into other gears and back into reverse multiple times, and it did not appear any time the vehicle was in reverse. The gear indicator did show that the vehicle was in reverse. The display for the rear parking sensors did appear on the instrument cluster, but there were no obstacles at the time, so I do not know if the sensors or the rear cross traffic warning were functioning as intended. I did not observe any other warnings or symptoms of a problem. This issue only persisted for one drive cycle. I drove home without the rear camera that day, and the next time the car was started, the rear camera feed was working again. Since it has worked ever since, I have not had anyone inspect the vehicle about this problem. I did not feel that my safety was at risk, and to my knowledge, there were no people nearby exterior to the vehicle when the camera feed was malfunctioning. However, my visibility to the rear was impaired, and had someone been near the rear of the vehicle while I was reversing, their safety would have been at risk.

NHTSA ODI 11703669

Started having misfire issues. Replaced spark plugs. problem continued. started having to add antifreeze regurlarly. 1 quart per 300 miles. multiple P0302 error codes. Dealer 1st tried to tell me was a loose coil pack. looked at it again and said needs a new head gasket possibly a whole new engine. 117,000 miles and this seems rediculous for a 60,000 dollar vehecle. Especially since Jeep already issued an extended 150,000 mile warranty for 2011-2013. with 100's of these same issues still happening on 2018's and latter they clearly did not correct the defect.

NHTSA ODI 11702534

I took my JEEP to the dealer because it was making a rubbing sound. They told me the rear end and differential where out and needed replaced. Originally the parts were on a 45 day backorder. 3 months later the parts on still on back order. I notified Jeep customer service, my case manager said the parts may be available Dec. 19th. There is a high demand for these parts and that there are not enough available.

NHTSA ODI 11701788

Unknown, but when I attempted to accelerate onto a highway, and the engine threw the check engine light along with the electric throttle light and the traction control system. The battery was still show 14.3volts, the oil pressure was in range and the temperature of the engine was normal. The vehicle wouldn't go faster than about 20-25mph with out shifting hard and or the RPMs rev high to shift. The mechanic said both batteries are shot and the electric mapping system maybe faulty.

NHTSA ODI 11698779

My 2018 Jeep Wrangler Sahara JL's "Driver Information Digital Cluster Display" (on dash; in front of steering wheel) goes blank or vigorously flickers and then turns off. This has been an ongoing issue. You cannot see vehicle information at all - gauges, system information, speed, etc. This puts the driver and passengers at risk. The problem has been confirmed by my local mechanic. There is an open recall for the same issue for Jeep Wranglers of same model and year, but my VIN is not included. The recall is "Part 573 Safety Recall Report 24V-652." Please advise.

NHTSA ODI 11698018

We found cracks in the battery from swelling. We know for certain that the BPCM needs to be replaced. This issue is the same one the NRTA did a recall on for 2020+ Jeep Wrangler models. I had the issue fixed (was un-driveable) and it cost me over $4000. Looking for detail on why 2018 models weren’t considered in the latest recall.

NHTSA ODI 11697579

The contact owns a 2018 Jeep Wrangler. The contact stated that while driving at an undisclosed speed, the vehicle stalled, and the engine seized. In addition, the contact stated that several unknown warning lights were illuminated. The contact stated that the failure had occurred while driving on a busy highway full of traffic and tractor-trailers. The contact stated that the vehicle was stuck in an unsafe location, in the middle of the highway. The contact exited the vehicle, trying to get to a safe area, onto the shoulder of the road. The contact stated that the grounds were icy and snowy. The contact stated that while crossing the highway on foot, trying to get to the shoulder of the road, the contact fell. The contact was transported to the local Medical Center by ambulance. The contact sustained a fractured left leg and fractured left knee. The contact stated that medical treatment was ongoing. The vehicle was towed to the dealer, where the vehicle was diagnosed with engine failure. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. In addition, the contact stated that the failure occurred a month after the vehicle was purchased. The manufacturer was not made aware of the failure. The failure mileage was approximately 61,000. The VIN was unavailable.

NHTSA ODI 11696819

On August 6, 2025, while driving at approximately 65 mph on the highway, the vehicle experienced a sudden and total loss of motive power. The engine warning lights illuminated, and the vehicle would not accelerate, forcing an emergency maneuver across multiple lanes of traffic to reach the shoulder. This failure occurred just one day after a warranty repair for the same issue, and followed a previous 199-day repair for a known camshaft defect. This sudden power loss in highway traffic created an extreme and unreasonable risk of a high-speed collision and serious injury.

NHTSA ODI 11696420

Faulty CANBUS connector/CANBUS failure. This issue tends to be a random and inconvenient occurrence which can be difficult to initially diagnose. Causes the jeep to stall, power steering to fail, causes all dash lights to light up and keeps the jeep from start up. Acts as if the part needs to cool down before the jeep will restart. The failure of this part has caused the jeep to stall on the highway at high speeds. Two manufacturer dealers inspected the battery, auxiliary battery, alternator and starter; found no issue with those parts. One dealer said our issue was due to the ABS module; replaced it and it did not fix the issue. Replaced the CANBUS connector and the issue has resolved. This is a known issue among jeeps both new and old and can pose a serious safety risk. To answer the question of how fast the vehicle was going when this issue occurred; the failure of this part happens at both highway speeds and residential speeds. There are currently 52,XXX miles on our jeep and the failure started, roughly, April of 2019. Jeep was purchased, brand new, April of 2018. It started with the jeep failing to start then grew to the jeep entirely stalling out while driving.

NHTSA ODI 11696443

Dashboard information disappears at random including mileage, speedometer, etc. Radio and backup cam freeze and reset regularly. Taken to dealership multiple times since 2018 and they never fix it.

NHTSA ODI 11695970

Continuous engine problems Says not in park/ is in park Clicking sounds when turned off Steering wheel won’t lock Will turn over but won’t start even tho all lights come on and air All lights will turn off when brake is pressed and when foot is off brake the lights will flash and the car will beep continuously All lights in gear will be lit up orange but can’t move it

NHTSA ODI 11695681

The Check Engine light illuminated and diagnostic code P219A was recorded (Bank 1 Air/Fuel Ratio Imbalance), and the engine has a ticking noise. The dealership has indicated the issue likely involves the valvetrain/rocker arms/lifters and will require engine internal repair (valve cover removal, spark plug replacement, possible rocker arm replacement) estimated at ~$2,900-$4,500. The 3.6 L Pentastar engine has been the subject of numerous owner complaints of ticking noise, power loss, misfire, and premature valvetrain failure. I understand there have been related Jeep Technical Service Bulletins (such as 09-002-14 and 09-008-18) addressing these types of failures. A class action lawsuit (Maugain et al. v. FCA US LLC) alleges defects in the 3.6L Pentastar engine’s valve train (rocker arms, lifters) and failure to disclose the defect. Maintenance History: Regular oil changes (every <6,000 miles) at approved service centers; no prior major engine internal repairs. Concern: The defect affects engine performance, may lead to catastrophic engine failure, and potentially reduces safe vehicle operation and control (power loss, hesitation). Relief Sought: I request the NHTSA open a vehicle safety defect investigation and compel FCA / Chrysler / Jeep to evaluate this condition under recall criteria.

NHTSA ODI 11695176

The contact owns a 2018 Jeep Wrangler. The contact stated that while driving approximately 55 MPH, the instrument cluster went black. The contact had not taken the vehicle to a local dealer or independent mechanic. The vehicle was not diagnosed or repaired. The manufacturer was not informed of the failure. The contact researched online and related the failure to NHTSA Campaign Number: 24V652000 (Electrical System); however, the VIN was not included. The failure mileage was approximately 123,000.

NHTSA ODI 11695196

The fuel pump relay that is embedded within the Totally Integrated Power Module (TIPM) failed on my 2018 Jeep Wrangler JK Unlimited after only 47391 miles, causing intermittent engine stalls and problems starting. When taken to the Sisbarro Deming, NM CDJR dealership for repair, there were no replacement TIPMs in the stock system available to fix my vehicle, despite my vehicle being only 7 years old. This suggests an abnormally high rate of failure if the manufacturer is unable to maintain an adequate stock to support their vehicles. Given this has been an issue with Jeeps of previous model years (1), it is evident the problem has not been addressed yet. (1) https://www.autosafety.org/cas-calls-nhtsa-investigation-chrysler-totally-integrated-power-modules-tipm/

NHTSA ODI 11695277