What 37 owners told NHTSA about the 2023 Rivian R1t Bev

I was driving to a restaurant and out of nowhere started hearing this metal-on-metal sound 1/4 mile before I got there. I pulled into the parking lot and it kept getting worse, so I called Rivian to tow the car. They confirmed it was a hub and shaft bolt that came loose. I have video of the sound it made if needed. The Rivian technicians took the pictures that I am uploading here.

NHTSA ODI 11739639

On multiple occasions I have experienced the defrost feature of my 2023 Rivian R1T blowing cool air instead of warm or hot air, leading to a build up of ice on the windshield while driving. I have brought this concern to Rivian's attention with two service appointments, both of which resulted in Rivian noting they couldn't see any errors in the vehicle's diagnostic logs. I specifically noted the date, time, and temperature of one event but Rivian failed to copy the log data when requested. The issue is trivially reproducible in temperatures around 32ºF, when the defrost mode is enabled. Tapping the defrost/defog button on screen twice to enable defrost mode results in the vehicle selecting the vents for floor and windshield heat, speeds the fan to near maximum, and is supposed to blow hot air to aid in clearing built up ice. Instead what happens is the vents blow cool air for several minutes at maximum fan speed. Then the fan motors slow to their slowest speed at which time the vents blow slightly warm air After 5-10 minutes the fans speed up to maximum and the air coming from the vents is cool. When the vehicle was initially purchased, the defrost feature blew air hot enough to nearly be uncomfortable on the face. This is very much in line with any other vehicle I have owned when the defrost temperature and fan speed was set the maximum. But after an end of year update in 2024 or early 2025, the defrost feature began blowing cooler air and has never regained its original ability to clear the windscreen. The winter of 2025 and early 2026 has now resulted in this complaint. Rivian maintains the system is functioning as expected, but the service center staff doesn't quite seem to understand the severity of the issue. They claim a bug report can not be filed with Rivian until they capture an error in diagnostic data that they repeatedly fail to collect. Instead their advice is to enable cabin vents to warm the cabin instead of the windshield.

NHTSA ODI 11731452

No changes to the car happened before the airbag system went out.

NHTSA ODI 11720146

When it rains, or water is allowed to collect on top of the roof, water seeps in through the hinges of the driver and passenger sun visors. Depending on how much water is allowed to collect, it can trickle in or gush right inside the interior of the vehicle. Not only can it come in thru the sun visor hinges, but water also came out of my center roof console where my hazards and SOS button are at, causing me to worry about a water + electricity issue. Furthermore, the water obviously gets the carpeted floor wet. My truck is in the Van Nuys Rivian service center for the 2nd time for this issue. This is a well known issue on Rivian forums and on the Rivian subreddit.

NHTSA ODI 11708829

My truck was recently upgraded to software version 2050.38.0. After the upgrade, I drove my truck about 3 miles in about 5 minutes. When I arrived at my destination, I exited the truck to get something out of the rear seat. The rear door was locked; this is normal. I returned to the front seat to unlock the door via the control panel, but the unlock function did not work. The button is in the center touchscreen of the truck. I check the screen on the center console. It appeared the unlock button was disabled due to the information screen from the code update. This screen was not there when I exited the truck. After I acknowledged the screen, the unlock button was working. If I were trying to unlock the doors due to an emergency, this delay would be an issue. I feel the unlock door button should always work. Disabling the button for a verification screen is a safety hazard.

NHTSA ODI 11696263

The vehicle’s Driver+ advanced driver assistance system (including Adaptive Cruise Control and Highway Assist) repeatedly failed during normal highway driving. The system would display “Driver Assistance Features Unavailable – Service Soon” and immediately disable all assisted-driving functions, even in clear weather and well-marked lanes. This occurred intermittently from approximately 1,200 miles onward and continued for over a year despite multiple repair attempts by the manufacturer’s service centers. The malfunction directly affected safe operation, as the system could disengage without warning at highway speeds, forcing sudden driver intervention. The issue was reproduced and documented by the manufacturer’s technicians during at least one service visit, which resulted in replacement of the vehicle’s driver-assistance computer. The failure continued even after that replacement. The vehicle has been inspected and serviced numerous times by the manufacturer, with diagnostics performed on the cooling system, cameras, sensors, and ADAS module. Each repair attempt either failed to duplicate or failed to permanently correct the defect. The safety risk is loss of Adaptive Cruise Control and Highway Assist functions while driving, unexpected disengagement of automated steering/braking, and lack of reliable warning timing to the driver. Warning messages appeared frequently throughout 2024–2025, beginning within the first few months of ownership. The defect remains unresolved and appears systemic rather than isolated to this vehicle.

NHTSA ODI 11694627

I was shifting my truck from park to reverse when the shift handle snapped off. There was no warning and I had just driven the vehicle a couple hours earlier. The truck only has 13k miles on it.

NHTSA ODI 11682044

Rivian R1T was brought to independent tire center for tire rotation on same day before 1,000 mile trip. Technician documented: "Drivers side front CV axle bolt almost completely backed out". Bolt took less than one rotation by hand to come off. Documented by tire shop technician. - Possible safety impact by possible failure of half-shaft and loss of steering control and/or wheel loss - The vehicle is scheduled for an inspection by manufacturer July 14, 2025 - There were no warnings or symptoms prior to discovery

NHTSA ODI 11671561

The vehicle caught fire and was completely destroyed. The fire was due to an electrical or battery system defect.

NHTSA ODI 11662648

I Was driving down highway and receive a fe messages in quick order -front sensors off, front camera off, collision detection off, regenerative braking off - started moving toward right shoulder prior to pulling off - car lost speed at high rate putting me in jeopardy of being rear ended. 2025.06.012 code was loaded into truck the day before - this was first real drive after new code loaded into truck - early in the morning the warning for front sensors off, collision detection off, regenerative braking off did come and I pulled off and rebooted system. Everything seemed to be fine - made into office and again on return the loss of speed at high rate was a safety issue.

NHTSA ODI 11650888

1. The powertrain, acceleration system, and defrost system failed. The vehicle unexpectedly entered Limited Performance Mode, but instead of allowing reduced acceleration as expected, it resulted in a complete loss of power and left us stranded in traffic. Additionally, a defrost system failure warning appeared, causing a loss of visibility. The vehicle is currently at a Rivian service center, and it should be available for inspection upon request. 2.The vehicle became completely unresponsive while on a single-lane on-ramp overpass, leaving us stranded in moving traffic. Other vehicles were traveling at 50-60 mph, and drivers had to swerve abruptly to avoid a collision. This failure created an imminent risk of a rear-end or multi-car accident, putting my wife and me—and other drivers—at serious risk of injury or death. Additionally, the defrost failure further compromised visibility, making it even more dangerous to remain in the vehicle while waiting for assistance. 3.The vehicle is currently at the Rivian service center, but Rivian has not yet provided a definitive diagnosis or explanation for the failure. We are awaiting their response and further inspection. 4. The vehicle is at Rivian’s service center, where it is undergoing inspection by the manufacturer. However, it has not yet been inspected by police or insurance representatives. 5. Yes, the “Limited Performance Mode” message appeared, but according to Rivian’s own system, the vehicle should have still allowed for reduced acceleration. Instead, it lost all power completely, leaving us stranded. Additionally, a defrost system failure warning appeared at the same time, preventing us from defrosting the windshield.

NHTSA ODI 11644509

My driver side door intermittently does not close. There is something wrong with the latch. I called service center over 3 times and still haven’t been given any immediate appointment as the issue of safety is paramount, as I can’t drive with an open door. I still haven’t had this issue resolved.

NHTSA ODI 11643620

Rivian passenger airbag is usually disabled (70 % cases) with adult passengers weighing about 125 lbs while they sit correctly in the front passenger seat. There is a warning light "Passenger airbag off". No problems with heavier passengers (> 140 lbs). There are tons of threads about this issue on Rivian forums, Reddit or Facebook groups. Based on these threads, sometimes Rivian service centers try to fix it (often unseccessfully) and sometimes they say it's normal. I've contacted a Rivian service through the Rivian app and they told me that it's a normal behavior because 125 lbs is near the treshold. But I never had similar issues with other cars.

NHTSA ODI 11636817

When driving on the highway with ADAS on with lane keeping assist turned on with software 2024.39.01, the truck would constantly pull me back into the center line even if I were not close to the white line on the road. This is very concerning as on a two-lane highway, it pulled me over the center line and towards an oncoming traffic. The latest software update seemed to make it more sensitive, not allowing "ping-ponging" and trying to keep the truck almost too centered, as other cars I have are not this aggressive. I ended up turning off LKA, but that should not be the solution.

NHTSA ODI 11626599

The passenger side airbag notification shows that the airbag is disabled when a passenger is seated in the seat and the car is moving. This happens very frequently when driving at various speed. If the passenger is not seated exactly at 90 degrees deeply in the seat in a perfect position, the airbag will be disabled. The sensitivity of the airbag sensor is very concerning. No one will sit straight position perfectly in a car, especially on longer rides and this is very scary to put the passenger at risk. The vehicle has been brought up for service for this particular issue and there has been no resolutions as it is deem "per the specs" by the service center. The problem has been reproduced by them, but again it was not repaired or fixed since it is diagnosed as normal operation.

NHTSA ODI 11614821

The horn in the car is very weak and not heard by 3d party when used. Had several occurrences when I needed to use the horn and the 3d party never mentioned it. It is a by far weaker than any other of my cars.

NHTSA ODI 11612796

The contact owns a 2023 Rivian R1T. The contact stated while driving at approximately 70 MPH with the cruise control activated while overtaking another vehicle, the vehicle independently activated the brake. The contact had not turned off the cruise control and there were no other vehicles nearby. The contact stated no warning light was illuminated. The contact stated that when the other vehicle had passed the contact’s vehicle, the brakes disengaged, and the cruise control resumed and accelerated the vehicle back to the pre-set cruising speed. The contact stated that the failure was intermittent but had become a recurring failure. The contact had taken the vehicle to a service center; however, the failure could not be duplicated. The vehicle was not repaired. Additionally, the contact stated that when the vehicle fully charged the battery, the indicator showed that the vehicle was at 100 percent charge with a range of 369 miles. The contact was only able to drive a range of 260 miles on a full charged battery before needing to recharge the battery. The manufacturer was informed of the failure. The failure mileage was approximately 7,000.

NHTSA ODI 11602873

The components that failed are Traction Control, Stability controls, and Anti-Lock Braking while in high regeneration mode. Vehicle can easily become incontrollable in low traction situations (in high regeneration mode) that is a danger to the driver and others on the road. Sequence of Events 1.Vehicle begins to Aquaplane 2.Driver (myself) removes foot from the accelerator pedal (standard technique to regain control) 3.The tires in the front loose more traction and skid due to high regeneration mode. 4.With even less traction the vehicle is out of control In the moment, my first concern and priority was other drivers. I was able avoid six lanes of traffic in the direction of travel without hitting another vehicle before hitting the should barrier. The vehicle felt like there was no ABS (Antilock Braking System) and no traction control. It felt like the vehicle locked all four wheels (like I had placed the vehicle in park). In addition, I had a service scheduled at the end of May 2024 (scheduled in January 2024) for issues with the rain sensor(s). I do not know if these sensor(s) comes into play. It is my belief that there should be a safety warning when using High Regeneration mode and the vehicle should automatically switch back to Low Regeneration mode with each new startup. I have noticed this feature in other electric cars (Audi/BMW) and have begun to understand why these vehicles perform this function. In addition, I have searched the Forum website and have discovered others that have experienced the same issue related to traction in this mode.

NHTSA ODI 11585044

Concern: - Passenger seat not detecting person sitting in it. Airbag not arming. Cause: - The Occupant Classification System (OCS) uses a pressure sensor in the seat bottom to classify whatever is in the front passenger's seat. An improperly seated occupant can "trick" the OCS into possibly classifying the occupant incorrectly. Being improperly seated can include improper use of child restraints, improper posture such as leg placement, reclining the seatback too far back, weight of the passenger that is too close to threshold values (movement might effect the narrow weight distribution, gray zone), and using aftermarket cushions and coverings on the seat. If the occupant is a child in a properly secured child-restraint, or if there is no occupant in the seat, the "Passenger Airbag OFF" telltale is expected to be illuminated. For adults, the "Passenger Airbag ON" telltale should be illuminated at vehicle startup. At this time, the occupant protection sensors and modules are functioning as designed.

NHTSA ODI 11584501

Car was lane corrected into other lane and started accelerating. Like getting hit by a bumper in a pinball machine. Avoided a head on collision but managed to safety maneuver into a fence instead of a tree.

NHTSA ODI 11582833

While driving with a passenger in the front seat, I noticed the passenger airbag was not enabled. Seems the passenger is not detected. Sometime having the passenger moving around or adjusting the seat/seatbelt would fix the issue and the airbag will enable. Randomly occurs and randomly fixes. Once it is enabled it seems to stay enabled for the remainder of the drive.

NHTSA ODI 11573682

The vehicle was parked on a 8 degree slope in the driveway with approximately 2 inches of snow on the drive way. Within thirty minutes of the vehicle being parked the truck slide down the driveway and crashed into the house. The parking brake failed and or is miss-engineered seeing that only two of the wheels were locked and two rolled noting the tire tracks in the snow. The saftey of myself and others could have been much worse if the truck hadn't hit the house and kept rolling down the hill into an adjacent street or house. There is other vehicle reports of this happening on online forums. The vehicle component has not been inspected by the manufacturer. The issue lies with it being an electrical motor and does not have a differential to lock the remaining tires as in an automatic gas powered vehicle. This company has relied on the parking break to only lock the rear wheels for the parking break despite it being an extremely heavy vehicle.

NHTSA ODI 11572970

Was driving on the highway in the left lane at roughly 80 mph and suddenly lost regenerative braking and almost got into an accident not realizing I had to use my physical brakes to slow down. Truck entered turtle mode and was able to make it safely over and back home. Problem got worse with rattling coming from the front compartment. Front half shaft was discovered to be detached and this will be the third this half shaft has been repaired. Video of the loose half shaft is available.

NHTSA ODI 11567244

Front Passenger airbag sensor does not recognize when a passenger is sitting in the seat. Airbag sensor turns off and on while driving depending on how passenger sits. If passenger shifts slightly forward the airbag sensor no longer detects them. I have never seen an issue like this in any other vehicle.

NHTSA ODI 11562517

Hello, I have a concern about the passenger side airbag in my 2023 Rivian R1T pickup truck. My wife is very small (weighs about 110 lbs., 5'2" tall). I've noticed on several occasions that when she's sitting in the passenger seat the airbag sensor will turn off because it's not detecting her sitting there. This happens more often if she crosses her legs or reclines the seat too much. As if she's not putting enough weight directly on the seat airbag sensor. I understand this is a common complaint and have seen many threads about it in the online forums and on Reddit. I spoke with the Rivian Service Center in Gaithersburg, MD, on Nov. 1 and was told it is "within spec". However it is my opinion that they should look into the weight threshold on the seat and ensure that it stays on when people are sitting there. Perhaps by tying it into the seatbelt buckle sensor? I am entering this complaint in hopes of drawing more attention to the issue so that Rivian might look into it. Thank you.

NHTSA ODI 11562124