What 253 owners told NHTSA about the 2016 Ram 2500 Crew Cab

The contact owns a 2016 RAM 2500. The contact stated while driving at an undisclosed speed, the steering wheel failed to steer in the intended direction. In addition, the contact stated that the steering wheel independently steered the vehicle to the right. The vehicle was taken to the dealer, however the contact was informed that the alignment could not be completed because of an unrepaired recall repair. The contact received a recall notification, NHTSA Campaign Number: 19V021000 (Steering). The vehicle was taken to the dealer, however the contact was informed that the recall repair was completed in July 2019. The vehicle was not repaired. The manufacturer was made aware of the failure but provided no assistance. The contact was informed that the recall repair was covered under warranty for two years from the date of completion. The contact stated that the recall repair was not performed, but marked as completed by the dealer. The failure mileage was approximately 97,000.

NHTSA ODI 11740029

Electronic brake controller faulty

NHTSA ODI 11735322

Grid heater nut/bolt detached and entered engine, causing catastrophic internal failure and total engine loss while driving.

NHTSA ODI 11733046

Adding to form 11717793

NHTSA ODI 11718528

Got into my truck after letting it warm up and the shifter broke out of the handle. It’s a known problem cause the design is flawed by putting so much pressure on the part. So in the end it breaks and then you can’t get your vehicle out of park or whatever gear it broke in. I was charged 718.00 for it to get fixed when I think this should be a recall or tsb.

NHTSA ODI 11718053

The vgt actuator failed the truck only has 127000 miles on it ram extended the warranty for 2015 trucks but not 2016. The part to replace it from ram has almost doubled in a years time. It is now $2170. For this part whose internal computer components have failed. The files uploaded was just for the part. I can upload the repair cost when done. I am just trying to get everyone to see how corrupt these companies are becoming. They could have saved themselves some problems if they would just paid the $3000 to fix it this is a rough estimate.

NHTSA ODI 11717792

The contact owns a 2016 Ram 2500. The contact stated that while driving at various speeds, the check engine warning light illuminated, and the vehicle lost motive power and went into LIMP Mode. The contact stated that the failure was intermittent but also occurred while towing a 30-foot trailer or a 24-foot trailer. Occasionally, after pulling over, turning off, and restarting the vehicle, the vehicle returned to normal functionality. On other occasions, the vehicle was towed back to the residence after the failure. The vehicle was taken to an Auto Parts Store and diagnosed using a handheld scanner, and a fault code associated with the turbo actuator for the diesel engine was retrieved. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. The contact called a local dealer and was notified of Technical Service Bulletin Number: 09-005-22; however, the vehicle was not included. The manufacturer was informed of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was approximately 113,000.

NHTSA ODI 11717651

ITBM Integrated Trailer Brake Module not outputting correct breaking voltage to trailer.

NHTSA ODI 11716646

Drag link issue led to not being able to get an alignment, dealership and RAM support refused to fix it, as it was completed but they did not do it correctly the first time and it is dangerous

NHTSA ODI 11712751

The low pressure power steering hose is leaking and can't get part for it. Been having to invest in tons of power steering fluid and want to know if this is gonna be a recall. It is very frustrating that we can't get parts for the problem.

NHTSA ODI 11710332

ABS FAILURE, WHICH TURNS OFF TRACTION CONTROL AND CRUISE CONTROL. This is a known issue for the HCU to fail. How is this not a recall on 2016 but it is on 17 and 18. Same parts.... have replace front hubs with new ABS sensors and rear ABS sensors, still on. It has to be the HCU or the module.

NHTSA ODI 11707920

Incident Report – Gear Shift Failure Date of Incident: 11/10/2025 Vehicle: 2016 Ram 2500 Pickup Truck VIN [XXX] Mileage: [Insert Mileage] Location: [Insert Location of Incident] Description of Incident While attempting to shift the vehicle from Park (P) into Drive (D), the shift lever suddenly went limp and lost all resistance. Upon applying slight additional pressure to engage the transmission, the shift lever snapped off completely. The gear shift bracket—the component securing the shift rod—fractured in half at the point where the shift rod inserts into the bracket. This mechanical failure rendered the vehicle inoperable and unable to be shifted out of Park. No warning lights or prior symptoms were observed before the failure. The broken part was visually inspected and confirmed to be the shifting lever bracket, consistent with Mopar part number 68470756AA. Immediate Actions Taken The vehicle was safely secured to prevent unintended movement. Engine was turned off and keys removed. Visual inspection confirmed that the shift lever bracket had broken at the rod insertion point. Tow service was arranged for transport to a repair facility. Photographs of the damaged bracket and shifter assembly were taken for documentation. Assessment This incident represents a critical component failure of the gear shift mechanism, resulting in sudden loss of control over transmission operation. The break occurred under normal shifting force, indicating a possible material or design defect in the bracket assembly. Recommended Actions File a warranty or recall inquiry with Ram/Stellantis regarding potential defects in part 68470756AA. Replace the damaged bracket with a verified OEM replacement. Inspect surrounding linkage and cable components for stress damage or misalignment. Retain the failed part for potential recall or manufacturer investigation. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ODI 11698580

I previously had recall 17V-821 work completed. This recall was for The Brake Transmission Shift Interlock (BTSI) locking pin may become stuck in the open position. I have the same issue now and see that NHTSA is investigating failed recall fixes. I have taken this to the dealer and an independent shop and am now trying to figure out how to get this repaired.

NHTSA ODI 11693040

The contact owns a 2016 Ram 1500. The contact stated that the shift solenoid change message was displayed. The vehicle was taken to the local dealer for a recall repair. Upon retrieving the vehicle, the vehicle failed to shift and had no power. The vehicle was diagnosed with a faulty shift solenoid. The replacement parts were on backorder. The local dealer later informed the contact that the transmission was faulty and needed to be replaced. The vehicle was not repaired. The manufacturer was contacted and filed a complaint. The manufacturer declined to cover the cost of the repair. The failure mileage was approximately 238,000.

NHTSA ODI 11690345

The grab handle or left interior a arm part broke and fell of in my lap while I was driving luckily it did not fall off when I entered the vehicle or I would have been flat on my back. I contacted Stelantis got the typical run around. Tried to order new part but part has been discontinued. Now I am driving with airbag not covered and exposed. The part number for my truck is 5RM911XAC you can check discontinued. I ask Stelantis to find part after I tried for months to no avail. Reply was sorry part discontinued. What broke was the plastic that holds two screws in. Hopefully no one gets hurt if others break. In my opinion it seems like a bad design to save money. The replacement part by the way is $313.00 for plastic with leather wrapped handle. I was willing to spend that but the attitude I got from Stelantis was very non caring after I spent $60,000 on a truck in 2016. I ordered this part in May of 2025 then in August they told me it was discontinued.

NHTSA ODI 11688411

Transmission gear selector lever can be moved from park to reverse, neutral, and drive without having the brake pedal depressed. This is the way the transmission gear selector currently operates. This is not a one-time incident. I bought this vehicle recently and noticed this transmission gear selector lever issue about a month ago.

NHTSA ODI 11673363

Towing my trailer with my 2016 Ram 2500, at 48,000 miles I experienced complete turbo failure in heavy traffic at highway speeds. Power was reduced to minimums causing hazardous conditions. The "check engine" light illuminated. I maintained control and eventually had the codes scanned at both a local auto parts store and Larry Miller Dodge/Ram in Sandy, Utah. The codes identified were for the turbo actuator/turbo. Larry Miller said they could replace the actuator, but I'd be back in three weeks for the turbo replacement as well. They were three weeks out for labor. I contacted a local diesel repair shop who purchased the turbo and actuator from Larry Miller Dodge Ram and had it installed in a day. Subsequent to these repairs ($5,400.00) I have learned that MOPAR issued Warranty Bulletin D-22-06, dated March 16, 2022, for the same make and model as mine, only for the year 2015. My truck was built in 2015 and the parts and computer codes for failure are identical. This published warranty bulletin issued relief of a new extended warranty of 15 years /150,000 miles for the installed turbo actuator/turbo. Since mine failed at 48,000 miles, this could be a continuation of the aforementioned issue with the stated 2015 year failures. I was lucky I didn't create a traffic accident when this turbo system failed since it was sudden and violent when the loss of power occurred without warning. I'm asking you to probe or look at the facts that the issue with these Garrett turbos are still outstanding whether Doge/Ram/Fiat/Mopar wants to include them in their campaign. The danger is real. The costs to retired people, such as myself, is consequential and devastating. It is unfair there is no way of sending queries to the manufacturers to alert them of this condition. The only way to communicate is to talk to a person in India and the communication barrier is tremendously difficult as is the chance of getting any return on the days and weeks of attempts for resolution.

NHTSA ODI 11663742

It is the Water pump We have the Concentric brand with out a vent hole picture attached ( which is the one under recall but doesn’t come up on our vin) Yes A Mechanic No No

NHTSA ODI 11663422

I received an NHTSA recall notice V06/NHTSA 19V-021 on or about April 2023, I brought this vehicle to Stat Line Jeep Dodge RAM located in Somerset, MA early April to fix the vehicle pursuant to the recall notice for a Drag Link problem/defect. Upon arrival the service department stated they had not received a welding machine necessary to fix the problem and to call for another appointment, On or about April 10, 2023, I again brought the vehicle to State Line RAM dealership to complete the repair. On May 31, 2023, I brought the vehicle to Town Fair Tire Center to have all 4 new tires replaced and have the front end aligned. I was told that the alignment could not take place since the dealership welded the "Tie Rods" together. I brought the vehicle back to State Line dealership and asked why my vehicle's tie rods were welded. They told me that the NHTSA had told them that was the fix. I wanted to know how to get the vehicle aligned and the dealership told me that I would have to pay $850.00 to replace them and that should have been done except the NHTSA said to weld them together.

NHTSA ODI 11662561

Def system failed ABS, track,tire pressure. Service 4 wheel drive system. 4 wheel drive system temporarily unavailable.

NHTSA ODI 11655557

The service engine lamp came on. When the mechanic investigated, it was determined that the problem is identical to the Warranty Bulletin titled Cummins 6.7L Turbocharger Actuator - X99 Warranty Extension that pertains to the 2015 RAM 2500 pickup. My vehicle is a 2016 and there is no warranty extension, even though it is an identical problem. The vehicle was not drivable as is and I had to replace the Turbocharger Actuator. I am assuming that this is a known problem to Cummins and to RAM. There should be a Warranty Bulletin for the 2016 also.

NHTSA ODI 11653069

The contact owns a 2016 Dodge Ram 2500. The contact stated that the vehicle was included in NHTSA Campaign Number: 19V021000 (Steering) and the vehicle was taken to the dealer for the recall repair. The contact stated that the vehicle was taken for an alignment and the contact was informed that an alignment could not be completed because to the tie rods were welded together. The dealer who performed the recall repair was contacted and confirmed that the tie rods were to be welded as stated in the recall. The dealer informed the contact that the repair was approved by the NHTSA and that for the alignment to be performed, the entire part had to be replaced. The vehicle was not repaired. The recall repair stated that Chrysler would notify owners, and dealers would check the steering linkage jam nut tightness, replacing the drag link assembly or welding the nut to the adjuster sleeve, free of charge. The contact believed that the dealer failed to perform the remedy due to the tie rods not specifically being mentioned as what was expected to be welded together. The manufacturer was made aware of the issue and confirmed that the remedy was to weld the tie rods. The manufacturer opened a case regarding the failure. The failure mileage was 17,519.

NHTSA ODI 11640592

Contacted FCA Recall Assistant Center on 10/23/2024 and filed a complaint against Corwin Chrysler Dodge, 3306 E. Kearney St., Springfield, MO., 65803 regarding Safety Recalls that Corwin Chrysler Dodge fraudulently checked off in the system as fixed, but they were not fixed. Case# [XXX] was assigned to the complaint. Keith is the assigned CS Manager and can be reached at 844-378-0575, ext: 3124. Keith informed us today that his hands are tied at this time and he doesn't have the authority to uncheck the safety recalls in the system that would be up to the dealership Corwin Chrysler Dodge in Springfield, MO. As of today, January 15, 2025, we still do not have resolution to this issue. We were informed to reach out to James River Dodge RAM, Ozark, Missouri. List of recalls below that we are aware that were completed by Corwin Chrysler Dodge of Springfield, Missouri. 1. Water Pump Recall T51 (Corwin Chrysler Dodge completed) 2. New Tailgate Latch U74 (Corwin Chrysler Dodge completed) We spoke to David, Service Manager, on 10/25/2024 and was informed since the system shows everything regarding the safety recalls for this vehicle are checked off in the system as fixed by Corwin Chrysler as completed. David told us that the safety recalls in the system that are showing fixed would need to be unchecked in the system in order for his team to recheck all the recalls on this vehicle and get paid for the service, because Corwin was paid for fixing the safety recalls when they checked them off in the system. 1. Steering - Drag Linkage Welded V06 (James River Chrysler could visibly see this was completed (10/25/2024) 2. Truck Engine Recalibration 67A (James River Chrysler completed on 10/25/2024) No other recalls to the best of our knowledge have been fixed on our 2016 RAM, Dodge Laramie 2500, 6.7L, Diesel Motor, vehicle. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ODI 11636143

The contact owns a 2016 Ram 2500 equipped with Hankook Tires, Tire Line: Dynapro AT2, Tire Size: 275/70/R18, DOT Number: 1BJWBRNB. The contact stated that while his son was driving approximately 60-65 MPH, the vehicle started severely vibrating and shaking on the front passenger’s side of the vehicle. The driver pulled to the side of the road and removed and replaced the front passenger’s side tire with the spare. The vehicle was driven to Discount Tire where it was diagnosed that there was a bubble on the tire. The vehicle was taken to Walmart where the tire was replaced. The contact stated that approximately 3 months after replacing the tire, the driver’s side rear and driver’s side front experienced the same failure. The contact continued to drive at speeds lower than 20 -25 MPH. The dealer was not made aware of the failure. The manufacturer was not made aware of the failure. The vehicle failure mileage was 137,804, and the tire failure mileage was 23,000.

NHTSA ODI 11614360

I have a 2016 Ram 2500 Power Wagon that i have turned into a show truck. The truck has never been off-road or in the mud, it is driven to and from the shows. Last [XXX] as i was driving to Hickory, NC for a car show on Saturday August 31st my truck instantly lost power and turned on the engine light. The transmission felt like it was stuck in second or third gear, so i pulled over and scanned the PCM to see what the DTC code and it came back as P0870. Went online to research the code and see what it had to say about it and it stated to clear the code to see if it comes back on which i didn't. The light has not returned as of yet but when the truck hits overdrive it has a high pitch squeal coming from it meaning the transmission. I brought it in to my local dealership on Wednesday September 4th to have it looked at they performed DIAG and CVI inspection to find the transmission is starting to fail internally recommend replacing the transmission. Now want me to pay out of pocket for a new transmission even though i have max care warranty on the truck when i bought it new. i don't have $6000.00 to pay for a new transmission that's on back order. If it comes down to it and i have to get my neighbor to help me get the transmission out of this truck cause I'm [XXX] then i will rebuild it my [XXX] thing myself before i pay them $6000.00. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ODI 11613233