What 358 owners told NHTSA about the 2022 Jeep Grand Cherokee Trackhawk

Front collison warning icon illuminated on the dash. Settings were changed. Temperature changed from Fahrenheit to Celsius. Back up camera lines no longer showing up. CarPlay glitches. Mechanic did a reset a month ago and it came back on 2 weeks later.

NHTSA ODI 11749443

Hybrid battery system, still don't have heat after 2 years of car ownership. Not to mention the hybrid battery failure rate, I've driven several times and the vehicle will just have no power. I bring it to the dealership almost monthly and they always have some excuse. The vehicle's lane assist is also a hazard. I'll just be driving down highway and it'll just jerk the wheel randomly.

NHTSA ODI 11733656

I would like to file a complaint against Jeep. I drive a 2022 Jeep Grand Cherokee 4XE with 16,000 miles. While driving to the Store, the electronic parking brake engaged while driving. This caused braking system damage. Jeep / Manufacturer are refusing to reimburse me. The total cost was: $9,129.26. This effected the Actuators, Brake Calipers, Rear Rotors, and Brake Pads. This is not normal wear and tear, however a safety-related defect.

NHTSA ODI 11728449

The electronic steering quit working at 55 mph, I was very hard to steer afterwards, there wear other indicator lights besides the steering warning light, I will add a picture of them. I did already do a report but have pictures to show the problem. I kept the core to figure out what happened, there is water in the unit control area for the motor. The issue started at the same time the water pump was leaking, and I believe that caused the water and corrosion in the electronic area. I also have another invoice for the diagnosis from the hudson dealer for about 600 dollars but mislaid it, If I need it I can get a duplicate.

NHTSA ODI 11724314

The Forward Collision Warning (FCW) and Automatic Emergency Braking (AEB) systems on my 2022 Jeep Grand Cherokee are consistently failing to operate as intended, creating a significant safety hazard Symptoms include: System Inactivity: The FCW fails to alert or provide braking assistance during clear, high-risk frontal collision scenarios. Persistent Warning Lights: The 'FCW OFF' indicator illuminates on the instrument cluster and cannot be cleared by toggling settings in the Uconnect 5 system. Software Defaults: Following Over-the-Air (OTA) updates, the FCW and Pedestrian Emergency Braking (PEB) systems default to 'OFF' and often remain disabled despite user attempts to re-engage them. Hardware Misalignment/Blinding: Frequent 'ACC/FCW Limited Functionality' messages occur even in clear weather with clean sensors, indicating a potential calibration or module communication failure. I am referencing XXX and Manufacturer Communication XXX regarding these specific software/hardware faults. Despite these known issues, the dealership Ziegler Chrisler Doodge Jeep Ram in Schaumburg, IL has been unable to provide a permanent resolution. This failure leaves the vehicle without critical, advertised safety protections during operation

NHTSA ODI 11724374

Issue 1: After several recalls - the battery issue still remains. Often not kicking in and leaving a power deficit (loss of motive power). The gap is short, but when low speed on battery and you push the accellerator to merge/turn, etc. and there is a delay - it can cause an accident. Issue 2: The investigation of alerts of pedestrians - happens intermittently. There has never been a fix. Issue 3: The tire pressure monitoring system fails to read intermittently - a warning on the dash indicates it is not working and to get it checked. Dealership has noted problem, but never fixed. Still occurs 3+ years. Issue 4: Radio/infotainment system blanks out or becomes unresponsive. When relying on this device for navigation, that becomes a problem.

NHTSA ODI 11722854

known software glich known as "the Italian Bug" Car switches to Italian and disables FCW, paddle shifting and changes many features to metric, farenheit to celsius, psi to kpa, mph to kilometers, many features can be reset but not FCW and Paddle Shifting. It's unknown what other features get disabled but this all causes significant driver distraction trying to reset everything while driving as they are encountered. Jeep has multiple TSBs on this with no known permanent fix.

NHTSA ODI 11722477

I own a 2022 Jeep Grand Cherokee that is experiencing unintended automatic braking while driving. The crash detection/forward collision warning system shows a constant warning light on the dashboard. While driving under normal conditions with no obstacles present, the vehicle will suddenly brake on its own. This has occurred multiple times and now happens almost daily. The problem first occurred on November 26, 2024, the same day I purchased the vehicle used with approximately 34,158 miles. The issue has continued as the mileage has increased to approximately 51,500 miles. This creates a serious safety risk because the vehicle can suddenly brake in the middle of traffic without warning, which could cause another vehicle to collide with the rear of my vehicle. I am concerned about the risk of a crash or injury. The problem has been reported to the dealership multiple times since purchase. The vehicle has been in the shop for repair attempts, but the issue has not been permanently corrected. The warning light remains on and the unintended braking continues to occur during normal driving. The vehicle is currently available for inspection.

NHTSA ODI 11722121

Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). I have had this to the dealership 4 times to be fixed without success. Because this is dangerous (for settings/gauges/units to no longer be useful while driving), and it occurs randomly.

NHTSA ODI 11719790

Issue has occurred at least 4 times: upon start, vehicle infotainment system appears in Italian language (difficult to revert to English as menu controls are now in a foreign language). Forward Collision OFF warning light illuminates on dash. Vehicle settings show all forward collision warning systems are ON. Servicing dealership has not identified any Diagnostic Trouble Codes with forward collision warning systems. Only way to reset system is dealer service via propriety manufacturer software. Multiple other Jeep Grand Cherokee owners reporting same problem: [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ODI 11709020

The Forward collision Warning light came on again after switching to Italian. Dealership says the warranty just ran out but this multiple times this happens and clearly it has not been fixed. FCW issue

NHTSA ODI 11703990

Screens switches to Italian, also screens freeze or go blank, Front Collision Warning (FCW) light illuminates and can't be turned off. Bluetooth randomly disconnects, Auto door locks don't engage; paddle shifters for manual gear selection cease functioning, pedestrian avoidance, automatic emergency braking, and high-beam assist stop working; memory seats unexpectedly adjust while driving. I have to bring the car to the dealer to fix this, this happens every 14 days or so.

NHTSA ODI 11703763

Earlier this spring, when we started our 2022 Jeep Grand Cherokee, the language had changed itself to Italian, the units were metric, the ‘Forward Collision’ off icon was stuck on the dashboard. Also the paddle shifters did not work. In May, 2025, we paid $204.41 to Gary Mathews Motors in Clarksville, TN to ‘diagnose’ and ‘fix’ the issue. Fast forward to this month, and the issue happened again! They didn’t ‘fix’ anything. See forum where HUNDREDS of other owners are experiencing the same exact issues: [XXX] Also see Star bulletin regarding this issue: [XXX] From what I can see in the forums, there is no permanent fix for this issue. Despite this, Jeep/Stellantis keeps charging customers to ‘diagnose’ and ‘fix’ the issue which is a scam/fraud since they know there is no permanent fix. I have reached out to Jeep, and been promised follow-up from one of their specialists that never comes. I have all transcripts and promised timelines to expect follow up that never happen. I will attach photos where they admit they haven’t met the timeline for follow up that was communicated, and as of now, despite additional promises of communication/follow up I still have not heard from them. Having a forward collision system that does not function properly puts myself and others at risk. Also having a dash in units/language you do not understand is also a safety issue. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ODI 11700889

The system has many errors, The primary issue is the forward collision warning indicator light is on showing that the service is off. But it isn't, you can go into the system settings and turn the service on and off without issue. The light stays on. It does work as far as I can tell also. It seems to be causing the paddle shifting to be disabled. I can't downshift going down a steep grade and am being required to use by brakes. Which can be very dangerous. It is causing another issue that I cannot recall at the moment. There is another issue with the settings of the vehicle randomly changing to Euro type metric settings. The clock changing to 24 hour, tire pressure changing to kpa? mph changing to kph, all the different unit of measurements changing over. Randomly, not at the same time but consistently every few weeks. At first it seemed like it was connected to a monthly software update, but now its random. The vehicle has been taken to a Jeep dealership in Sherman, tx about the issue of the Forward collision system and they fixed it. Then the problem reappeared a month afterward. I've called and they confirm that the correct US software is installed. I am the only driver of the vehicle, so no one else is changing the settings. I work a full time 9-5 job and do not work close to a dealership, which has become an issue for these matters. All the issues I have had with the vehicle seem to be related to them updating the software without my approval. Currently my vehicle has 71k miles on it and won't be covered by the 50k warranty. The warning light issue started after 50k miles.

NHTSA ODI 11699012

randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. I have taken it to the dealer twice, and they say there is nothing they can do and to wait for a possible software update, but none has come and it has been over a year. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp).almost caused crash twice!!!

NHTSA ODI 11698055

Randomly, & without warning, the instrument cluster & Uconnect display will glitch and flicker off then on but switch into language I do not speak or understand (Italian). Coinciding with language switch, instrument cluster & radio display settings revert back to default settings, paddle shifter becomes inoperative (with no menu option to enable), forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change & menu option to switch units back to Fahrenheit gone, auto tilting mirrors in reverse off . ***This is clearly a dangerous situation because of all the functions &gauges that change while driving & the fact it is difficult if not impossible to recover from this due to the language of the setting menus, & the complexity of finding & navigating menus to try to wade through all the settings menus &change setting back, some items cannot be reset (like the FCA off lamp and temp units). I have taken it to the dealer for diagnostic, they found no error codes but found service bulletin S210800193 and S2108000221 performed IPC Customer programmable features Configuration to temporarily correct the issue, but it happened again 3 weeks later. I had to pay $254 for this service, and the issue isn't fixed. Here is an example forum discussion, indicating many if not all vehicles are affected: https://www.jeepgarage.org/threads/forward-collision-warning-off-light-is-stuck-on.250301/#replies Many people on the forum believe this issue did not start until a software update a year or so ago. This is a well known and widespread problem, and there is even a DOT Bulletin on the issue: dot.report Bulletins https://dot.report/bulletins/11006236 Because this is dangerous and very distracting while driving (for settings/gauges/units to no longer be useful while driving), and it occurs randomly, I strongly believe this issue should be a manufacturer recall. I am available for any needs.

NHTSA ODI 11694897

Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. I have taken it to the dealer 7 times, and they say there is nothing they can do and to wait for a possible software update, but none has come and it has been over two years. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] Many people on the forum believe this issue did not start until a software update a year or so ago. This is a well known and widespread problem, and there is even a DOT Bulletin on the issue: dot.report Bulletins Because this is dangerous (for settings/gauges/units to no longer be useful while driving), and it occurs randomly, I strongly believe this issue should be a manufacturer recall. I am available for any needs. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ODI 11694012

While driving all warning lights were activated and power steering completely failed. The vehicle was in drive and fully charged

NHTSA ODI 11694071

While driving on a local neighborhood street at approximately 38 miles per hour, ( cruise control possibly engaged) , all the lights on my dashboard suddenly illuminated. A messages appeared stating that service was required for every guidance and braking system. At that moment I became concerned, so I attempted to use the brake. Despite pressing the brake pedal as hard as I could, the car did not slow down. I cannot remember if I downshifted using the paddle shifters on the steering wheel, but I was able to coast to a manageable speed and pull into a parking lot. I then turned the vehicle off and on again, but all the warning lights remained on the dashboard. After waiting for about five minutes, the vehicle was restarted, and this time none of the warning lights were on. Since I was very close to home, I drove the rest of the way very slowly. Later, I searched online and discovered that other people have experienced this same problem. Some of the information I read suggested that water can get into a component, and it had been raining on the day of the incident and the day before. My primary safety concern is what would have happened if I had been approaching a stoplight or driving on a freeway where I needed to stop suddenly. I am confident that I would not have been able to stop in time to avoid a crash. It is frightening to think of what could happen if a child were to run into the street and this happening. I immediately made an appointment with my local Jeep dealership. The dealer has since driven the vehicle 98 miles but has not yet been able to replicate the issue.

NHTSA ODI 11693153

This happened 4 tines before Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. I have taken it to the dealer twice, and they say there is nothing they can do and to wait for a possible software update, but none has come and it has been over a year. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] Many people on the forum believe this issue did not start until a software update a year or so ago. This is a well known and widespread problem, and there is even a DOT Bulletin on the issue: dot.report Bulletins Because this is dangerous (for settings/gauges/units to no longer be useful while driving), and it occurs randomly, I strongly believe this issue should be a manufacturer recall. I am available for any needs." INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ODI 11692551

On April 12th my husband and I were driving our Jeep after it had a recall and update to fix the recall of a battery issue on all 4xE models. We were doing 45 mph down the road and it threw an error code that said “Service Hybrid Electric Vehicle System”, “Service Emergency Braking System” the Jeep then shut off and said for us to push the brake and press start for us to turn the car on in the middle of the road. We were able to safely get off the road, when we came to a stop the car put itself into park automatically. We had to start it a couple of times to make sure it was ok to turn around and drive home. It was then towed to the dealership. They told us they could see the issue logged in the system but they could not replicate the same issue after driving it. They told us that we had to come and pick up the Jeep and I told them how unsafe that made me feel for us and everyone on the road. They told us there’s nothing they could do for us. We got the car back and another issue arose where are Passive Entry Switch became corroded and our car kept unlocking itself throughout the night. The day we got it back from them we were driving it and we got the same “Service Hybrid Electric Vehicle System” again. So I brought our Jeep back again and they told me in the service department they’ve been working with the engineers at Jeep and they are waiting for an update to fix it and it’s one of four in the area with this issue and Jeep is fully aware of the severity of the issue. They also told me they would be holding on to our car until it’s fixed. I was called by the head of the service department at that dealership and was told they need their loaner car back and they got word they’ll maybe have a fix for our car in November. They knowingly gave us our completely unsafe Jeep back and told us to try for Lemon Law - with all parties knowing the severity of the security and lives put at risk on the road. We have gotten this error code many times and are told there is no fix

NHTSA ODI 11682514

I have code B273C-00 digital crash input on my jeep. This is the code dealerships were informed if they see this code the vehicles have to be grounded. At this time, there is no remedy for the grand cherokees. The dealership can't release my jeep back due to safety reasons, and it's been with them for over an month and counting.

NHTSA ODI 11681418

After having my 22 Jeep Grand Cherokee at OBX Jeep in NC for over 10 months for electrical and camera issues it was shipped to Brown Daub Jeep in Easton, PA for overdue PA State Inspection due to the length of the repair in NC. Supposedly OBX Jeep said it was repaired but car immediately had electrical issues including FCW OFF dash light. The PA Jeep dealer corrected electrical issues following Jeep Star Publication and it was returned to me July 3, 2025. FCW OFF dash light has come back on on [XXX] and OBX Jeep is indicating I must again leave it with them to further diagnose the issue. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ODI 11680429

"Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. I have taken the vehicle to the dealer recently and they performed an update when the radio was blank and AM radio failed to function. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] Many people on the forum believe this issue did not start until a software update a year or so ago. This is a well known and widespread problem, and there is even a DOT Bulletin on the issue: dot.report Bulletins Because this is dangerous (for settings/gauges/units to no longer be useful while driving), and it occurs randomly, I strongly believe this issue should be a manufacturer recall. I am available for any needs." INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ODI 11676424

Instrument panel switches to Italian, forward collision off light gets stuck on and my seat moved abruptly while I was driving down the road. I have taken my Jeep into the dealership last year for this problem, it was “fixed” but has come back. Noticed the light stuck on last week. Today while I was driving the panel changed to Italian and my seat moved abruptly. Many people on online forums express experiencing the same problem.

NHTSA ODI 11675741