What 34 owners told NHTSA about the 2020 GMC Yukon Denali Xl 1500

Shortly after the warranty expired my torque converter went out and damaged the transmission. After speaking with several transmission shops this is a known problem with this vehicle! The torque converter and transmission are poorly made, and no matter if you get all of your services this will still happen to you! This should be a recall on this vehicle. Less than 4 years old and I am having to spend over $5,000 to replace a transmission. The vehicle just hit 100,000 miles. If this is a known issue with this vehicle why has it not been recalled? The dealership tried to tell me I just needed battery cables replaced. I decided to get a second and third opinion and as I suspected the transmission is gone. There were NO warning lights, the car just suddenly started not wanting to change gears while driving. At the red light it jumped and wouldn’t move which made the car behind me almost hit me. There were no other symptoms until the gears started not wanting to change. No noises, smells, or any indication that something was wrong. The vehicle is now at a transmission shop awaiting repair. This needs to be a recall if this is a known issue.

NHTSA ODI 11590461

2020 GMC Yukon transmission failed at 103.000 miles

NHTSA ODI 11555374

Ambient temp was 100 degrees for reference. Had been driving about 5 hours. Went to stop and had no power assist for brakes. This continued for at least 20 miles. Stopped and confirmed vac hose was connected. I tried to remove vac hose to check for vac at booster but was afraid I might break the part. Electrical plug at vac hose booster connection was secure. Continued driving and it began to work again. Condition: brake pedal took considerable foot pressure to apply brakes. Zero power brake assist was available. My qualifications; a past ASE master teck.

NHTSA ODI 11534400

Transmission slipping and damage

NHTSA ODI 11531159

The transmission is out. Prior to it going out, I experienced loss of power, gear slipping, shuttering and not being able to go among other things. This is very dangerous and can cause serious accidents to occur. This should not be happening on such an expensive and newer vehicle.

NHTSA ODI 11487720

TL* THE CONTACT'S WIFE OWNS A 2020 GMC YUKON EQUIPPED WITH CONTINENTAL TIRES, TIRE LINE: CROSSCONTACT LX SPORT, TIRE SIZE 245/50/R20. THE CONTACT STATED WHILE DRIVING 65 MPH, THE DRIVER'S SIDE FRONT TIRE EXPERIENCED A BLOWOUT. THE VEHICLE WAS TOWED TO DAVID BALES BUICK GMC (1327 JACKSBORO PIKE, LAFOLLETTE, TN 37766, 423) 562-8431) WHERE THE VEHICLE WAS STILL AWAITING A DIAGNOSTIC TEST. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOT INFORMED OF THE FAILURE. THE FAILURE MILEAGE WAS APPROXIMATELY 14,900.

NHTSA ODI 11406453

TL* THE CONTACT OWNS A 2020 GMC YUKON. THE CONTACT STATED WHILE REVERSING, THE BACK OVER PREVENTION CAMERA WAS OBSTRUCTED AND THE CONTACT WAS UNABLE TO SEE A PROPER IMAGE WHILE THE VEHICLE WAS IN REVERSE. THE CONTACT STATED NO WARNING LIGHT WAS ILLUMINATED. THE VEHICLE WAS TAKEN TO THE LOCAL DEALER SHELTON BUICK GMC, INC. (855 S. ROCHESTER RD, ROCHESTER HILLS, MI 48307, (248) 266-2156) TO BE DIAGNOSED. THE CONTACT WAS INFORMED THAT THE CAMERA FUNCTIONED AS DESIGNED. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS INFORMED OF THE FAILURE. THE FAILURE MILEAGE WAS APPROXIMATELY 6,000.

NHTSA ODI 11386660

THE RENTED 2020 TAHOE WAS STATIONARY. A PASSENGER SITTING IN THE LEFT THIRD ROW SEAT BECAME STUCK IN THE SEAT BELT. SHE WAS UNABLE TO OPEN THE SEATBELT CLASP AS IT GOT STUCK AND FAILED TO UNLATCH. THE MORE THE PASSENGER STRUGGLED TO UNLATCH THE SEATBELT, THE PROGRESSIVELY TIGHTER IT BECAME. PASSENGER COULD NOT DISENGAGE THE SEATBELT CLASP BY PRESSING THE TINY RED BUTTON. THREE OTHER PASSENGERS TRIED TO RELEASE THE SEATBELT AND COULD NOT. PASSENGER WAS TRAPPED WITH TIGHT SEAT BELT HOLDING HER IN. OTHER PASSENGERS CALLED EMERGENCY PERSONNEL WHO ALSO COULD NOT RELEASE THE EVER TIGHTENING SEAT BELT. PASSENGER WAS RELEASED WHEN THE RANGER CUT THE SEAT BELT WITH A SEATBELT CUTTING EMERGENCY TOOL. IT WAS A VERY SCARY AND DANGEROUS EXPERIENCE. LATER, SOME OF OUR GUESTS FIGURED OUT THAT YOU HAVE TO PRESS THE TINY RED BUTTON ON THE LEFT LATCH WITH A PIECE OF THE RIGHT BUCKLE. A PASSENGER SHOULD BE ABLE TO RELEASE THE SEATBELT BY DEPRESSING THE RED BUTTON. A PASSENGER CANNOT EVEN REACH THE BUTTON FROM THE SEATED POSITION AS THE BUTTON IS TINY AND CANNOT ACCOMMODATE AN ADULT FINGER TO DEPRESS IT. THIS IS THE WORST EXAMPLE OF ENGINEERING I HAVE EVER EXPERIENCED. I AM FRANKLY AMAZED THAT THIS DESIGN PASSED ANY SAFETY TESTS. PLEASE ADDRESS THE ISSUE BEFORE SOMEONE IS HURT OR KILLED BY BEING TRAPPED IN THE VEHICLE AND UNABLE TO ESCAPE. *TR

NHTSA ODI 11330175

LINE KEEP ASSIST NOT WORKING PROPERLY. ASSISTANCE SYSTEMS FOR PARKING OR BACKING NOT WOKING PROPERLY. LANE CHANGE ALERT NOT WORKING PROPERLY

NHTSA ODI 11307294