What 195 owners told NHTSA about the 2019 Hyundai Elantra Gt

Excessive oil consumption, shudder in motor while driving . Check engine light cam on. Visibility in headlights very low and high beams only working sometimes.

NHTSA ODI 11660084

The driver and passenger headlight has been replaced and the bulbs but the headlights keep going out was told it is an electrical problem and contact manufacturer. Also emergency braking did not work in recent accident nor did forward collision warning.

NHTSA ODI 11654195

The contact owns a 2019 Hyundai Elantra. The contact stated while driving at an undisclosed speed, the contact stated that the high-beam headlights became inoperable. The contact stated that the high-beam headlights failed to function properly. The contact stated that the bulbs for the high-beam headlights were replaced; however, the failure persisted. The contact engaged the parking brake to stop the vehicle. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The approximate failure mileage was 52,000.

NHTSA ODI 11650117

No warning light for oil consumption and it depletes rapidly. Also, High beam lights stopped working and you have to hold the signal in place and the high beam still doesn't turn on. Ive had so many issues with this car since purchasing it, it ridiculous and saddening how there hasn't been any recalls and the issue before this one was dangerous and life threatening. Also, since it's purchase it consumes oil at a rapid rate that has been documented and each time I've visited the repair shop they informed 'there's no oil' in the vehicle and no oil light or anything comes on to warn me. I find out about it because of an entirely different issue needing to be fixed.

NHTSA ODI 11645903

Problemas con el motor, específicamente la lubricación. El vehículo fue reparado y aún continuó con los problemas de lubricación, incluyendo los llamados " sprocket" que se dañaron. He leído que Hyundai a retirado muchos vehículos por este mismo problema.

NHTSA ODI 11631345

The contact owns a 2019 Hyundai Elantra. The contact stated while driving at an undisclosed speed, the high beam headlights failed to function as intended. The vehicle was taken to the dealer where it was diagnosed with headlamp failures. The contact was informed that the headlamps needed to be replaced. The vehicle was not repaired. The contact was informed of Technical Service Bulletin: T5G, which was related to the failure. The contact was informed that the repair was completed for the previous owner. The manufacturer was made aware of the failure. The contact was informed that the repair was not covered under the Technical Service Bulletin: T5G. The failure mileage was unknown.

NHTSA ODI 11626666

high beams don’t work . it’s a safety issue because i live in wi and drive on dark roads and there’s deer raccoons etc, running out in the roads everyday. it has been inspected by morries west bend honda and video recorded. it’s a internal issue with the high beam internal flap/mechanism that sopposed to move when high beam commanded on .

NHTSA ODI 11622351

tHE HIGH BEAMS DOESNT WORK. INSIDE THE CAR IT SHOWS THE BLUE LOGO LIKE IF THE LIGHTS ARE IN HIGHBEAMS BUT OUTSIDE IT DOESN;T CHANGE. THE LOW BEAMS ARE NOT EFFECTIVE AND I CAN HARDLY SEE AT NIGHT. I AM TAKING IT TO THE DEALER TO SEE IF IS NOT TOO EXPENSIVE TO FIX IT BUT MY CAR SHOULD BE PART OF THE RECALL FOR HIGH BEAMS. I DO NOT USE THE CAR OFTEN AND CAN;T USE IT AT NIGHT. I CAN NOT SEE ANYTHING AT NIGHT RESULTING IN THE INABILITY TO USE MY CAR AT NIGHT.

NHTSA ODI 11622382

I am unable to use the high beams. Low beams are very hard to see with making risky when driving at night. No warning lights. I have a service call to dealer. It is available for inspection. No known maintenance issues prior to event.

NHTSA ODI 11606915

The mechanism that exposes the bright part of the head light bulb goes out on this make model vehicle it is a common issue. There is one bulb, only my dim lights work, when I click the bright lights on nothing happens. Very common issue with the vehicle. Nearly 500$ a piece to repair.

NHTSA ODI 11593614

The contact owns a 2019 Hyundai Elantra. The contact stated that while driving at an undisclosed speed at night, she became aware that the high beam headlights were not functioning. No warning lights were illuminated. The vehicle was taken to the dealer, who diagnosed a failure with the headlight housing assembly. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was unknown.

NHTSA ODI 11587734

I was going 40MPH when my car started to produce loud noises and stalled. It immediately lost power and I had to pull over on the side of the road. It started back up after 30 minutes and I was able to drive it home, but it continued to make loud noises and I had to drive very slow. Battery is good with 70% charge and the alternator is good.

NHTSA ODI 11562816

The headlights on this vehicle have been repetitively malfunctioning, the lamps are not burnt out but the high and low beam lights malfunctioning regularly. I have had the system and computer checked, the computer reset. Nothing is appearing to be wrong but my high beam lights are completely non functional for the third time in 3 months

NHTSA ODI 11562205

The electrical plate for the right daytime running light must have fallen out of the engine compartment, according to the dealer service center, because it was no longer there. A warning light appeared on the dashboard system as a yellow triangle enclosing a yellow exclamation mark. It presented a safety issue by causing the warning light to appear on the dashboard panel while the vehicle was being driven. The dealer service center informed me of the cause of the dashboard warning light when I took it to them for diagnosis. There were no warnings prior to the failure.

NHTSA ODI 11558953

When Daylight Savings time changed, I realized that my headlights were not aimed properly. While having them aimed, the tech noticed that the aiming rod had fallen off the track, and the light on the drivers side is shining only five feet from the car, onto the ground, whether on high beams or low beams.

NHTSA ODI 11556554

High beams quit working I. Weather conditions and now high beams don’t work period and have to replace head light do to problem with assembly driver side and passenger side high beams don’t work

NHTSA ODI 11549702

The contact owns a 2019 Hyundai Elantra. The contact stated that the high-beam headlights were dim and became inoperable. The driver was unable to see the roadway clearly. There was no warning light illuminated. The vehicle was taken to the local dealer, where it was determined that the light switch had failed and needed to be replaced. The vehicle was not repaired. The manufacturer was not contacted. The failure mileage was approximately 50,000.

NHTSA ODI 11537589

The high beam does not work even after bulb replacement on the 2019 Elantra(the low beams work just fine). A sound of an actuator trying to work is heard coming from the engine with a slight flicker of light but no successful high beam is shown after engaging the high beam actuator on the wheel. This is detrimental to the safety of drivers at night which could lead to a crash, injury, or fatality.

NHTSA ODI 11535217

The high beam nolonger functions. On this make model for this year, the manufacturer uses only one bulb for low and high beam. This is accomplished by using a hood to shield part of the bulb; lowered for low beams, raised for high beams. The problem is the mechanism used to raise and lower the shield is made out of cheap plastic. Whenever the gears break or skip a cog the shield will not raise. Spending 2 labor shop hours to replace two shield mechanisms, cheap plastic parts with cheap plastic parts is not the answer. Multiple owners have ask Hyundai to find a better fix… all for not.

NHTSA ODI 11528032

The high beam headlights don’t function properly. The low beam is all that works on both headlights. Something to do with the way the shield is not moving up to allow the high beams to function. On line looks like this is a common problem

NHTSA ODI 11514059

High beams are not working on both headlight assemblies. Car uses a bulb with 1 filament and actuator to simulate a high beam and both headlight assembly actuators failed on a car with 51k miles. Hyundai has a TSB for this issue, so they are aware of this issue and this needs to be a recall, not just a TSB as this is a major safety issue.

NHTSA ODI 11505513

My high beam lights stopped working. Replaced bulbs and they still don’t work.

NHTSA ODI 11504340

When I was driving in very dark areas I was trying to turn on my high beams. I have manual headlights so I have to push the lever back. I see the high beam logo on the dashboard, but no lights appearing higher than the low beams. I searched up that it’s a common recall for the 2019 Hyundai Elantra’s and I believe I have that problem with my car. I hope that this description helps out in making the decision as soon as possible. Thank you!

NHTSA ODI 11501171

Dim headlights and faulty high beam lights that do not work at all; while the sensor remains lit up on the dash board.

NHTSA ODI 11494884

the high beam actuator has failed which has resulted in loss of high beam usage.

NHTSA ODI 11494824